Hyundai Elantra Owners Manual
Cruise control systemDriving your vehicle / Cruise control system
➀ CRUISE indicator
➁ SET indicator
WARNING
- If the cruise control is left on, (CRUISE indicator light in the instrument cluster illuminated) the cruise control can be activated unintentionally. Keep the cruise control system off (CRUISE indicator light OFF) when the cruise control is not in use, to avoid inadvertently setting a speed.
- Use the cruise control system only when traveling on open highways in good weather.
- Do not use the cruise control when it may not be safe to keep the car at a constant speed, for instance, driving in heavy or varying traffic, or on slippery (rainy, icy or snow-covered) or winding roads or over 6% up-hill or down-hill roads.
- Pay particular attention to the driving conditions whenever using the cruise control system.
- Be careful when driving downhill using the cruise control system, which may increase the vehicle speed.
CAUTION
During cruise-speed driving of a manual transaxle vehicle, do not shift into neutral without depressing the clutch pedal, since the engine will be overrevved. If this happens, depress the clutch pedal or release the cruise control ONOFF switch.
NOTICE
During normal cruise control operation, when the SET switch is activated or reactivated after applying the brakes, the cruise control will energize after approximately 3 seconds. This delay is normal.
To set cruise control speed:
To increase cruise control set speed:
To decrease the cruising speed:
To temporarily accelerate with the cruise control on:
To cancel cruise control, do one of the following:
To resume cruising speed at more than approximately 25 mph (40 km/h):
To turn cruise control off, do one of the following:
© 2024 www.hyundaielantramanual.com. All Rights Reserved.